Custom Pcb Manufacturing Assembly Android 7/9 Motherboard Industrial Control Board

Configuration instructions

Product characteristics
Memory :2GB LPDDR3+16GB eMMC(default)4GB LPDDR3+32GB eMMC(optional)4G LTE: Support 3GPP R8 Cat6 and Cat4,VoLTEWLAN:2.4G/5GHz,IEEE802.11a/b/g/n/ac
GNSS GPS/GLONASS/BeiDou个
Display output: maximum support for MIPI-1280X800, LVDS-1920X1080EDP-1920X1080,HDMI-1080P output (Main panel LVDS signal output, Slavepanel is MIPI signal. if required, other interfaces through the transfer board).RTC4
Audio output:1*2W/8R or 2*1.5W/8R
5*USB2.0,1*10/100M RJ45,1RS-232,2*UART(3V3)红Support Android 7/9 system customization, provide system APIlinterface code.perfect customer upper-level APP development4Voltage DC input: DC +12V, rated power <18WOperating temperature: -10°C~+ 45C, humidity: 10%~90%

The PCB manufacturing process typically involves the following steps:

1. Design: The circuit design is created using specialized software, which generates a file that contains information about the layout, component placement, and connections.

2. PCB Layout: The PCB layout is created from the design file, and includes the placement of components, routing of connections, and the creation of copper traces and pads.

3. PCB Imaging: The PCB layout is transferred onto a photosensitive material using a process called imaging. This creates a pattern that is used to etch the copper layer.

4. Etching: The copper layer is etched using chemicals, which removes the copper from the areas that are not covered by the photosensitive material.

5. Drilling: Holes are drilled into the PCB to allow for component placement and connections.

6. Plating: A thin layer of metal (usually copper) is plated onto the holes and surface of the PCB to improve conductivity.

7. Solder Mask: A layer of solder mask is applied to protect the copper traces and pads from oxidation and damage during the soldering process.

8. Silkscreen: A layer of silkscreen is added to label the components and provide other information.

9. Testing: The finished PCB is tested to ensure that it functions correctly and meets the required specifications.

Why did you choose us?

1. Experienced
Focus on PCBA electronics manufacturing for 8 years

Best partner for listed companies

Serving more than 60 European and American enterprises

Helped customers solve design problems more than 500 times

Help customers solve MP problems more than 800 times.

Help customers improve test reliability by more than 1000 times

2. Quality control
ISO9001:2015 quality management system certification

ISO13485 quality management system certification

IATF16949

LE2

Traceability system

Fully automated FCT testing

3. Quick response
Quick response principle within 1 hour

7 days * 24 hours

Team accountability

Sales staff with bachelor degree or above

Custom PCB Manufacturing Assembly

SMD PCB Manufacturing Assembly

Custom PCB Manufacturing Assembly Images